Data Protection Policy
JOHN LINNANE MOTORS
John Linnane Motors takes the safeguarding of personal data very seriously. This policy describes how John Linnane Motors meets its obligations under the General Data Protection Regulation in relation to the processing of personal data.
Automated Decision-Making (ADM): when a decision is made which is based solely on Automated Processing (including profiling) which produces legal effects or significantly affects an individual. The GDPR prohibits Automated Decision-Making (unless certain conditions are met) but not Automated Processing.
Automated Processing: any form of automated processing of Personal Data consisting of the use of Personal Data to evaluate certain personal aspects relating to an individual, in particular to analyse or predict aspects concerning that individual's performance at work, economic situation, health, personal preferences, interests, reliability, behaviour, location or movements. Profiling is an example of Automated Processing.
Consent: agreement which must be freely given, specific, informed and be an unambiguous indication of the Data Subject's wishes by which they, by a statement or by a clear positive action, signifies agreement to the Processing of Personal Data relating to them.
Data Controller: the person or organisation that determines when, why and how to process Personal Data. It is responsible for establishing practices and policies in line with the GDPR. We are the Data Controller of all Personal Data relating to John Linnane Motors Personnel and Personal Data used in our business for our own commercial purposes.
Data Subject: a living, identified or identifiable individual about whom we hold Personal Data. Data Subjects may be nationals or residents of any country and may have legal rights regarding their Personal Data.
Data Privacy Impact Assessment (DPIA): tools and assessments used to identify and reduce risks of a data processing activity. DPIA can be carried out as part of Privacy by Design and should be conducted for all major system or business change programs involving the Processing of Personal Data.
Data Protection Compliance Officer (DPCO): Aedeen Linnane
EEA: all EU member states, and Iceland, Liechtenstein and Norway.
Explicit Consent: consent which requires a very clear and specific statement (that is, not just action).
General Data Protection Regulation (GDPR): the General Data Protection Regulation ((EU) 2016/679). Personal Data is subject to the legal safeguards specified in the GDPR.
Personal Data: any information identifying a Data Subject or information relating to a Data Subject that we can identify (directly or indirectly) from that data alone or in combination with other identifiers we possess or can reasonably access. Personal Data includes Sensitive Personal Data and Pseudonymised Personal Data but excludes anonymous data or data that has had the identity of an individual permanently removed. Personal data can be factual (for example, a name, email address, location or date of birth) or an opinion about that person's actions or behaviour.
Personal Data Breach: any act or omission that compromises the security, confidentiality, integrity or availability of Personal Data or the physical, technical, administrative or organisational safeguards that we or our third-party service providers put in place to protect it. The loss, or unauthorised access, disclosure or acquisition, of Personal Data is a Personal Data Breach.
Privacy by Design: implementing appropriate technical and organisational measures in an effective manner to ensure compliance with the GDPR.
Processing or Process: any activity that involves the use of Personal Data. It includes obtaining, recording or holding the data, or carrying out any operation or set of operations on the data including organising, amending, retrieving, using, disclosing, erasing or destroying it. Processing also includes transmitting or transferring Personal Data to third parties.
Pseudonymisation or Pseudonymised: replacing information that directly or indirectly identifies an individual with one or more artificial identifiers or pseudonyms so that the person, to whom the data relates, cannot be identified without the use of additional information which is meant to be kept separately and secure.
Sensitive Personal Data: information revealing racial or ethnic origin, political opinions, religious or similar beliefs, trade union membership, physical or mental health conditions, sexual life, sexual orientation, biometric or genetic data, and Personal Data relating to criminal offences and convictions.
John Linnane Motors Personnel: all employees, workers, contractors, agency workers, consultants, directors, and others.
This Data Protection Policy applies to all Personal Data we Process regardless of the media on which that data is stored or whether it relates to past or present employees, workers, members or supplier contacts, website users or any other Data Subject.
This Data Protection Policy applies to all John Linnane Motors Personnel ("you", "your"). You must read, understand and comply with this Data Protection Policy when Processing Personal Data on our behalf and attend training on its requirements. This Data Protection Policy sets out what we expect from you in order for John Linnane Motors to comply with applicable law. Your compliance with this Data Protection Policy is mandatory. Any breach of this Data Protection Policy may result in disciplinary action.
(f) Processed in a manner that ensures its security using appropriate technical and organisational measures to protect against unauthorised or unlawful Processing and against accidental loss, destruction or damage (Security, Integrity and Confidentiality).
You may only collect, Process and share Personal Data fairly and lawfully and for specified purposes. The GDPR restricts our actions regarding Personal Data to specified lawful purposes. These restrictions are not intended to prevent Processing, but ensure that we Process Personal Data fairly and without adversely affecting the Data Subject.
(e) to pursue our legitimate interests for purposes where they are not overridden because the Processing prejudices the interests or fundamental rights and freedoms of Data Subjects. The purposes for which we process Personal Data for legitimate interests need to be set out in applicable Privacy Notices or Fair Processing Notices; or
A Data Subject consents to Processing of their Personal Data if they indicate agreement clearly either by a statement or positive action to the Processing. Consent requires affirmative action so silence, pre-ticked boxes or inactivity are unlikely to be sufficient. If Consent is given in a document which deals with other matters, then the Consent must be kept separate from those other matters.
Data Subjects must be easily able to withdraw Consent to Processing at any time and withdrawal must be promptly honoured. Consent may need to be refreshed if you intend to Process Personal Data for a different and incompatible purpose which was not disclosed when the Data Subject first consented.
Unless we can rely on another legal basis of Processing, Explicit Consent is usually required for Processing Sensitive Personal Data, for Automated Decision-Making and for cross border data transfers. Usually we will be relying on another legal basis (and not require Explicit Consent) to Process most types of Sensitive Data. Where Explicit Consent is required, you must issue a Fair Processing Notice to the Data Subject to capture Explicit Consent.
The GDPR requires Data Controllers to provide detailed, specific information to Data Subjects depending on whether the information was collected directly from Data Subjects or from elsewhere. Such information must be provided through appropriate Privacy Notices or Fair Processing Notices which must be concise, transparent, intelligible, easily accessible, and in clear and plain language so that a Data Subject can easily understand them.
Whenever we collect Personal Data directly from Data Subjects, including for human resources or employment purposes, we must provide the Data Subject with all the information required by the GDPR including the identity of the Data Controller and DPCO, how and why we will use, Process, disclose, protect and retain that Personal Data through a Fair Processing Notice which must be presented when the Data Subject first provides the Personal Data.
When Personal Data is collected indirectly (for example, from a third party or publically available source), you must provide the Data Subject with all the information required by the GDPR as soon as possible after collecting/receiving the data. You must also check that the Personal Data was collected by the third party in accordance with the GDPR and on a basis which contemplates our proposed Processing of that Personal Data.
You cannot use Personal Data for new, different or incompatible purposes from that disclosed when it was first obtained unless you have informed the Data Subject of the new purposes and they have Consented where necessary.
You will ensure that the Personal Data we use and hold is accurate, complete, kept up to date and relevant to the purpose for which we collected it. You must check the accuracy of any Personal Data at the point of collection and at regular intervals afterwards. You must take all reasonable steps to destroy or amend inaccurate or out-of-date Personal Data.
You must not keep Personal Data in a form which permits the identification of the Data Subject for longer than needed for the legitimate business purpose or purposes for which we originally collected it including for the purpose of satisfying any legal, accounting or reporting requirements.
The SIMI will maintain retention policies and procedures to ensure Personal Data is deleted after a reasonable time for the purposes for which it was being held, unless a law requires such data to be kept for a minimum time.
You will take all reasonable steps to destroy or erase from our systems all Personal Data that we no longer require in accordance with all John Linnane Motors applicable records retention schedules and policies. This includes requiring third parties to delete such data where applicable.
We will develop, implement and maintain safeguards appropriate to our size, scope and business, our available resources, the amount of Personal Data that we own or maintain on behalf of others and identified risks (including use of encryption and Pseudonymisation where applicable). We will regularly evaluate and test the effectiveness of those safeguards to ensure security of our Processing of Personal Data. You are responsible for protecting the Personal Data we hold. You must implement reasonable and appropriate security measures against unlawful or unauthorised Processing of Personal Data and against the accidental loss of, or damage to, Personal Data. You must exercise particular care in protecting Sensitive Personal Data from loss and unauthorised access, use or disclosure.
You must follow all procedures and technologies we put in place to maintain the security of all Personal Data from the point of collection to the point of destruction. You may only transfer Personal Data to third-party service providers who agree to comply with the required policies and procedures and who agree to put adequate measures in place, as requested.
You must comply with and not attempt to circumvent the administrative, physical and technical safeguards we implement and maintain in accordance with the GDPR and relevant standards to protect Personal Data.
The GDPR restricts data transfers to countries outside the EEA in order to ensure that the level of data protection afforded to individuals by the GDPR is not undermined. You transfer Personal Data originating in one country across borders when you transmit, send, view or access that data in or to a different country.
(a) the European Commission has issued a decision confirming that the country to which we transfer the Personal Data ensures an adequate level of protection for the Data Subjects' rights and freedoms;
(b) appropriate safeguards are in place such as binding corporate rules (BCR), standard contractual clauses approved by the European Commission, an approved code of conduct or a certification mechanism, a copy of which can be obtained from the DPCO;
(d) the transfer is necessary for one of the other reasons set out in the GDPR including the performance of a contract between us and the Data Subject, reasons of public interest, to establish, exercise or defend legal claims or to protect the vital interests of the Data Subject where the Data Subject is physically or legally incapable of giving Consent and, in some limited cases, for our legitimate interest.
You must verify the identity of an individual requesting data under any of the rights listed above (do not allow third parties to persuade you into disclosing Personal Data without proper authorisation).
You must immediately forward any Data Subject request you receive to the Data Protection Compliance Officer.
12.1 The Data Controller must implement appropriate technical and organisational measures in an effective manner, to ensure compliance with data protection principles. The Data Controller is responsible for, and must be able to demonstrate, compliance with the data protection principles.
(c) regularly training john Linnane Motors Personnel on the GDPR, this Privacy Standard, and data protection matters including, for example, Data Subject's rights, Consent, legal basis, DPIA and Personal Data Breaches. John Linnane Motors must maintain a record of training attendance by SIMI Personnel; and
(d) regularly testing the privacy measures implemented and conducting periodic reviews and audits to assess compliance, including using results of testing to demonstrate compliance improvement effort.
12.2 Record keeping
These records should include, at a minimum, the name and contact details of the Data Controller and the DPCO, clear descriptions of the Personal Data types, Data Subject types, Processing activities, Processing purposes, third-party recipients of the Personal Data, Personal Data storage locations, Personal Data transfers, the Personal Data's retention period and a description of the security measures in place. In order to create such records, data maps should be created which should include the detail set out above together with appropriate data flows.
12.3 Training and audit
We are required to ensure all John Linnane Motors Personnel have undergone adequate training to enable them to comply with data privacy laws. We must also regularly test our systems and processes to assess compliance.
You must regularly review all the systems and processes under your control to ensure they comply with this Data Protection Policy and check that adequate governance controls and resources are in place to ensure proper use and protection of Personal Data.
We are required to implement Privacy by Design measures when Processing Personal Data by implementing appropriate technical and organisational measures (like Pseudonymisation) in an effective manner, to ensure compliance with data privacy principles.
If certain types of Sensitive Data are being processed, then grounds (b) or (c) will not be allowed but such Sensitive Data can be Processed where it is necessary (unless less intrusive means can be used) for substantial public interest like fraud prevention.
If a decision is to be based solely on Automated Processing (including profiling), then Data Subjects must be informed when you first communicate with them of their right to object. This right must be explicitly brought to their attention and presented clearly and separately from other information. Further, suitable measures must be put in place to safeguard the Data Subject's rights and freedoms and legitimate interests.
We must also inform the Data Subject of the logic involved in the decision making or profiling, the significance and envisaged consequences and give the Data Subject the right to request human intervention, express their point of view or challenge the decision.
You may only share the Personal Data we hold with another employee or agent if the recipient has a job-related need to know the information and the transfer complies with any applicable cross-border transfer restrictions.
13. Changes to this Data Protection Policy
We reserve the right to change this Data Protection Policy at any time without notice to you so please check back regularly to obtain the latest copy of this Policy. We last revised this Data Protection Policy on [DATE].
Printed Name Aedeen Linnane ……………………………………………….
Date …28th August 2018……………………………………………………….
© Copyright SIMI
- Mon – Fri
- 8:30 am – 5:30 pm
- 10:00 am – 2:00 pm
Deal of the Week
Find Us On Facebook
- Sat nav coords:
- N: 52° 59.948' W: 6° 5.262'